Loading...
Waterjet-Cutter 2018-04-24T13:22:01+00:00

BIMONT GROUP has a 5-axis waterjet cutter.

Up-to-date technology for precise workpieces.
Highly efficient cutting with new possibilities.

A workable area of 2000 mm x 4000 mm is available for you.
Steel & Stainless Steel is precisely cut up to 60 mm,
Woode & Plastics up to 150 mm.

Waterjet Cutting Advantages Technical Specifications
Production Quantities Consultation

Waterjet Cutter

Precision in perfection.

Waterjet cutting expanded our, and therefore your ability by a multiple. The areas of application of waterjet cutting are diversified. The method is suitable for cutting various materials such as metals, composites, stone, wood, glass.

Advantages

Due to the low temperature, there are no heat affected zones, which act negatively on the material and the stress-free cutting by waterjet does not damage the metal structure. The cut leaves a clean, smooth cutting edge surface without burrs with nearly no post processing. 

Technical Specifications

Our waterjet cutter offers multidimensional cut operations by 5-axis, which offers intricate designs.

Covering an area of 2000 x 4000 mm, the water jet cutter we use operates at a pressure of up to 4130 bar and at a maximum speed of +/- 30 m / min.
The mechanical accuracy is +/- 0.08 mm, the repetition accuracy +/- 0.05 mm.

Production Quantities

In series production results from the thin cut kerf , which offers intelligent arrangement of cut shapes for you to save resources and as a result of that to produce less waste.

In addition to serial production, we also offer single-unit production and prototypes.

Consultation

The above information shows that a waterjet cutter is a very efficient product available for your support. Please feel free to contact us for more detailed information. 

Overview waterjet cutter:

  • Technical facts:
    • Workspace 2000 x 4000 mm
    • Mechanical accuracy: +/- 0.08 mm
    • Repeat accuracy: +/- 0.05 mm
    • Maximum speed: +/- 30m / min
    • Speed of axis movement: 90 ° / s
  • Cuts almost any material
  • No tarnishing effect
  • Heat affected zone at approximately 40-65 ° C
  • No structural changes
  • Very thin kerf
  • Efficient use of raw materials
  • Creates less waste
  • No toxic fumes
  • Nontoxic abrasive
  • No mechanical stress of the cut surfaces
  • Versatile application possibilities